HVAC Installation Price Ranges
Honest, upfront price ranges for the most common installations we perform across Long Island. Use this page to plan your project — then schedule a free in-home consultation and we will provide a written quote tailored to your home, your equipment selection, and the condition of your existing ductwork and electrical.
These ranges cover ductless mini-splits, central air conditioning, heat pumps, gas furnaces, air handlers, and indoor air quality upgrades. They are starting points, not bottom-line quotes. Final pricing depends on the equipment you choose, removal of the old system, permits, and any modifications needed during installation.
What These Numbers Mean
Most HVAC contractors will not show you a price until they are standing in your home. We take a different approach. The ranges below give you a realistic starting point for budgeting your project, so you can plan with confidence and avoid the sticker shock that some homeowners experience after a sales call.
Every installation is different. The size of your home, the condition of your existing ductwork, the layout of your mechanical space, and the brand and efficiency tier of the equipment all affect the final number. We will walk you through every line item during your free consultation so you understand exactly what you are paying for and why.
If you are weighing a new system against a costly repair, or if you are simply planning ahead for an eventual replacement, these ranges should help you start the conversation with realistic numbers. Reach out any time and we will set up a no-obligation visit.
Factors That Move the Needle
Equipment Tier and Efficiency
Higher SEER2 / AFUE / HSPF ratings, variable-speed compressors, and inverter-driven systems cost more upfront but lower long-term operating costs.Ductwork Condition
Existing ducts that need sealing, resizing, or replacement add to the project. We assess every system before quoting.Electrical Requirements
Some installations require service-panel upgrades, dedicated circuits, or new disconnects depending on the equipment.Removal of Old Equipment
Disposal of refrigerant and recycling of the old system is included in our installation work.Permits and Inspections
Town and Suffolk County permits are pulled and managed by us. Costs vary by jurisdiction.Starting Price Ranges by Category
Tap a category below or scroll through every type. Contact us for a quote tailored to your home.
Ductless Mini-Split
Single-zone to whole-home multi-zone systems
|
1-Zone System
Single indoor head — perfect for an addition, finished attic, or one room
|
|
|
2-Zone System
Two indoor heads from one outdoor unit
|
|
|
3-Zone System
Three indoor heads — common for upper-floor bedrooms or multi-room conversions
|
|
|
4-Zone System
Four indoor heads from a single condenser
|
|
|
5-Zone System
Five indoor heads — whole-home ductless coverage
|
Pricing shown is a general starting range for typical Long Island installations. Final pricing depends on equipment selection, ductwork condition, electrical work, permits, and removal of the old system. Contact us for a free, no-obligation quote tailored to your home.
Central AC Replacement
Whole-home central air conditioning by tonnage
|
2-Ton AC
Cools approximately 1,000–1,300 sq ft
|
|
|
2.5-Ton AC
Cools approximately 1,300–1,600 sq ft
|
|
|
3-Ton AC
Cools approximately 1,600–1,900 sq ft
|
|
|
3.5-Ton AC
Cools approximately 1,900–2,200 sq ft
|
|
|
4-Ton AC
Cools approximately 2,200–2,600 sq ft
|
|
|
5-Ton AC
Cools approximately 2,600–3,200 sq ft
|
Pricing shown is a general starting range for typical Long Island installations. Final pricing depends on equipment selection, ductwork condition, electrical work, permits, and removal of the old system. Contact us for a free, no-obligation quote tailored to your home.
Heat Pump Replacement
Ducted heat pump systems — heating and cooling in one
|
2-Ton Heat Pump
Approximately 1,000–1,300 sq ft of conditioned space
|
|
|
2.5-Ton Heat Pump
Approximately 1,300–1,600 sq ft of conditioned space
|
|
|
3-Ton Heat Pump
Approximately 1,600–1,900 sq ft of conditioned space
|
|
|
3.5-Ton Heat Pump
Approximately 1,900–2,200 sq ft of conditioned space
|
|
|
4-Ton Heat Pump
Approximately 2,200–2,600 sq ft of conditioned space
|
|
|
5-Ton Heat Pump
Approximately 2,600–3,200 sq ft of conditioned space
|
Pricing shown is a general starting range for typical Long Island installations. Final pricing depends on equipment selection, ductwork condition, electrical work, permits, and removal of the old system. Contact us for a free, no-obligation quote tailored to your home.
Gas Furnace Replacement
High-efficiency gas furnaces by heating capacity
|
45,000 BTU Furnace
Smaller homes and condos — approximately 1,000–1,400 sq ft
|
|
|
70,000 BTU Furnace
Average-size Long Island homes — 1,400–2,000 sq ft
|
|
|
90,000 BTU Furnace
Larger homes or homes with higher heat loss — 2,000–2,600 sq ft
|
|
|
110,000 BTU Furnace
Large or older, less-insulated homes — 2,600+ sq ft
|
Pricing shown is a general starting range for typical Long Island installations. Final pricing depends on equipment selection, ductwork condition, electrical work, permits, and removal of the old system. Contact us for a free, no-obligation quote tailored to your home.
Air Handler Replacement
Indoor blower / coil cabinets paired with AC or heat pump
|
2-Ton Air Handler
Pairs with a 2-ton AC or heat pump
|
|
|
2.5-Ton Air Handler
Pairs with a 2.5-ton AC or heat pump
|
|
|
3-Ton Air Handler
Pairs with a 3-ton AC or heat pump
|
|
|
3.5-Ton Air Handler
Pairs with a 3.5-ton AC or heat pump
|
|
|
4-Ton Air Handler
Pairs with a 4-ton AC or heat pump
|
|
|
5-Ton Air Handler
Pairs with a 5-ton AC or heat pump
|
Pricing shown is a general starting range for typical Long Island installations. Final pricing depends on equipment selection, ductwork condition, electrical work, permits, and removal of the old system. Contact us for a free, no-obligation quote tailored to your home.
Air Purification Options
Whole-home indoor air quality upgrades
|
Germicidal UV Light System
In-duct UV-C light treats coil and air stream
|
|
|
Air Scrubber
Active air purification with photocatalytic oxidation
|
|
|
Whole-Home Air Filtration
High-MERV media filter cabinet, installed at the air handler
|
|
|
Whole-Home Steam Humidifier
Adds controlled humidity through the existing duct system
|
|
|
Whole-Home Dehumidifier
Pulls excess humidity out of the entire house — ideal for Long Island
|
Pricing shown is a general starting range for typical Long Island installations. Final pricing depends on equipment selection, ductwork condition, electrical work, permits, and removal of the old system. Contact us for a free, no-obligation quote tailored to your home.
For 37 years, Central Air Systems has been the HVAC partner that Long Island families trust for heating, cooling, and indoor air quality services across Suffolk County and beyond. From our home base in Medford, NY, our fleet of fully-stocked service vehicles reaches communities throughout the region, delivering the same expert care and honest service that has defined our company since 1989.
Whether you need a routine maintenance visit, an emergency repair in the middle of a heat wave, or a complete system replacement designed for maximum efficiency, our team is ready to serve your home with the professionalism and expertise that decades in this business has taught us.
Ready for an Exact Number?
Use the ranges above to plan, then let us put a real, written quote in your hands. Every Central Air Systems consultation is free and never carries any obligation. Our NATE Certified team will assess your home, walk you through equipment options, and give you the kind of straightforward pricing you deserve from your HVAC contractor.
Have a project in mind? Pick up the phone or send us a message — we will be in touch quickly to set up a visit at a time that works for you.
